Huawei Pura 70 Ultra Recovery Mode

 How to enter recovery mode on Huawei Pura 70 Ultra ? Recovery Mode offers many useful options such as reboot system, factory reset, wipe data, data recovery, install software or firmware from phone memory or SD card, etc.

Hard Reset with Recovery Mode, is an important solution that is usually performed when all basic troubleshooting steps have been exhausted.

If your Huawei Pura 70 Ultra smartphone has problems like:

Although using Recovery Mode does not require much knowledge and experience, your device may be permanently damaged when process goes wrong.

HOW TO ENTER RECOVERY MODE ON Huawei Pura 70 Ultra

You can enter the Huawei Pura 70 Ultra recovery mode screen for offers many useful options, following the instructions below:

Turn off the device.
Press and hold Volume Up + Power buttons simultaneously till the device logo appears.
When it logo appears, release Power button but hold the others few more seconds.
Release all the buttons when Recovery Mode screen appears. If you see Android logo with No Command text, don't panic and just wait for a while.
You can use the Volume Up and Volume Down buttons to scroll up or down, and the Power button to select an option.

If your Huawei Pura 70 Ultra powers on, but won't load the operating system or only boots to the brands logo, this is a symptom of corrupted software. You'll need to perform a hard reset to have the operating system reinstalled to get your device working again.

To exit the Huawei Pura 70 Ultra recovery mode screen, come to Reboot System Now option and press Power button. The device will automatically reboot.